Skip to content
There is a system change taking place and orders are shipping but tracking isn’t always being provided. Apologies for the inconvenience and thank you for your understanding!
There is a system change taking place and orders are shipping but tracking isn’t always being provided. Apologies for the inconvenience and thank you for your understanding!
Turbo Air KUR18-3-N 538L three door stainless steel underbench chiller - Simply Hospitality NZ

Turbo Air KUR18-3-N Three Door Underbench Chiller - 538L

$3,910.00 - $3,910.00
$3,910.00
$3,910.00 - $3,910.00
$3,910.00
SKU KUR18-3-N

The Turbo Air KUR18-3-N is a 1800mm-wide, 538-litre three-door underbench chiller that combines refrigerated storage with a full stainless-steel worktop, keeping frequently used ingredients close to the production line without giving up valuable bench space.

Key Features

  • 538-litre capacity with three solid self-closing doors
  • 1°C to 8°C operating range with digital temperature control and monitoring
  • Side-mounted refrigeration system for front-access servicing
  • Front-breathing design suited to space-conscious commercial layouts
  • Stainless-steel exterior and food-zone interior surfaces
  • Three adjustable, heavy-duty PE-coated wire shelves
  • R290 hydrocarbon refrigerant and fan-assisted cooling
  • LED interior lighting, door locks and lockable front castors

Why Choose This Product

Choose the KUR18-3-N when the cooking line needs both a substantial landing or preparation surface and fast access to chilled stock. Its three-door layout spreads ingredients across a long, shallow cabinet, reducing the searching and stacking that can slow service, while the side-mounted, front-access refrigeration system makes maintenance far less disruptive in a tightly planned kitchen.
Simply Hospitality Notes

A very practical line fridge when 1800mm of work surface can do double duty as chilled storage. Its real operational advantage is the three-door spread: organise each section by station or ingredient family so staff can open only the compartment they need. Keep the left front grille clear, and treat the unit as chilled holding rather than equipment for cooling hot food.

Product Guide

Choose this model when you need a full 1800mm workbench and approximately 538 litres of accessible chilled storage. The three-door arrangement suits broad ingredient ranges better than a smaller two-door cabinet, while the side-mounted system preserves straightforward service access. Check the 700mm depth against the cookline and doorway route before ordering.

Brand Guide

About Turbo Air: Turbo Air specialises in commercial refrigeration designed around efficient airflow, durable foodservice construction and practical daily operation. The K-Series combines stainless-steel cabinetry, digital control, fan-assisted cooling and R290 hydrocarbon refrigerant. Selected models add service-focused features such as front-access condensers or automatic condenser cleaning, helping busy kitchens protect temperature consistency while reducing routine maintenance pressure.

Product Details

The KUR18-3-N is built for commercial kitchens that need refrigerated storage directly beneath the work surface. Three compartments provide practical separation for mise en place, dairy, sauces and other service stock. Fan-assisted cooling distributes chilled air through the cabinet, while the digital controller gives staff an immediate temperature reference. The side-mounted compressor and removable front grille allow routine condenser access without pulling the cabinet out from the line.

Best Suited To

  • Restaurant and hotel cooklines
  • Cafes, bakeries and production kitchens needing an 1800mm refrigerated workbench
  • High-throughput prep areas that benefit from three separate door zones
  • Installations where front access for ventilation and servicing is important

Technical Specifications

BrandTurbo Air
ModelKUR18-3-N
ConfigurationThree solid doors, side-mounted refrigeration
Capacity538L
Temperature range1°C to 8°C
Ambient rating35°C
CoolingFan-assisted / ventilated
RefrigerantR290 hydrocarbon
Power input280W, 1/4 HP
Electrical supply220-240V, 50Hz, single phase, 10A plug
Energy consumption1.91kWh per 24 hours
Shelves3 adjustable PE-coated wire shelves
Dimensions1800(W) x 700(D) x 860(H)mm including castors
Weight109kg
Mobility125mm castors; front set lockable
Warranty3 years parts and labour

Selection and Installation Considerations

Allow for the full 1800mm width, safe door swing and access to the left-side refrigeration module. The front-breathing arrangement is valuable where side clearance is constrained, but the front grille must remain unobstructed. Confirm the final electrical connection, ventilation clearances and site access against the specification sheet before delivery. This is a storage chiller, not a pull-down or blast-chilling cabinet; load it with product already at a safe chilled temperature.

Care and Operation

Keep door openings brief during service, avoid blocking internal airflow and distribute stock so cold air can circulate around each shelf. Clean the magnetic gaskets and stainless surfaces regularly, and use the removable front grille and supplied condenser brush to prevent dust restricting the refrigeration system. Isolate power before cleaning or servicing.

Downloads & Documentation

  • Dimension 1800(W) x 700(D) x 860(H)mm including castors
  • Weight 109kg

Welcome to Shopify Store

I act like: